Allied Telesis AT-S41 - Manual (Page 141)

AT-S41 User’s Guide
141
The Send File pop-up window is displayed in Figure 45.
Figure 45 Send File Pop-up Window
8. Click the Browse button on the Send File window to specify the target
location of the configuration file.
9. Click on the Protocol field and set to 1K Xmodem transfer protocol.
10. Click Send.
The switch immediately begins to download the configuration file
from the server. As this process begins, the XModem Send File
window displays current status of the configuration file
download.
The XModem File Send window is displayed in Figure 46.
Figure 46 XModem File Send Window
The configuration file downloading process will take a few
minutes.
Note
Do not interrupt the initialization process.