Allied Telesis AT-S41 - Manual (Page 73)

AT-S41 User’s Guide
73
Setting Port Trunk Status
To enable or disable a port trunk, perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type T to select the
Trunk Configuration Menu.
3. Type I to select the Select Stack ID command and specify the switch
in the stack where you want to set port trunk status.
4. From the Trunk Configuration Menu, type S to select Set Trunk Status.
The following prompt is displayed:
Enter trunk group number->
Enter the number of the port trunk group that you want to enable
or disable.
The following prompt is displayed:
Enable or Disable trunk group 1 (E/D)>
5. Type E to enable the port trunk group or type D to disable the port
trunk group.
Note
To enable or disable port trunk groups on another switch in your
switch stack, use the Select Stack ID option.