Allied Telesis AT-S41 - Manual (Page 226)

AT-S41 User’s Guide
226
Uploading/Downloading a Configuration File Using TFTP
TFTP software is available from various sources and is included in SNMP
which can be purchased through Allied Telesyn. A command line version
is included in most UNIX variants and in Windows NT. Please consult the
documentation or the manufacturer of the software used on the proper
use of the software.
You will need to provide the following information when using TFTP
client software to upload/download configuration files:
❑ TFTP Server IP Address
❑ Configuration File Name
This procedure assumes that you have already obtained a copy of TFTP
software and have stored it on the computer from which you will be
performing this procedure. Refer to the TFTP software instructions on
how to upload and download files in specific directories on your server
or computer.
To upload or download a configuration file on your AT-8350GB switch,
perform the following procedure:
1. Click on the Tools menu tab and choose Config Upgrade from the
sub-menu.
The Configuration File Upgrade page will appear, as displayed in
Figure 91.
Figure 91 Configuration File Upgrade Page
The parameters on the Configuration File Upgrade page are defined
below: