Allied Telesis AT-S41 - Manual (Page 186)

AT-S41 User’s Guide
186
Displaying Port Security Settings
To view the switch’s port security settings, perform the following
procedure:
1. Click on the Advanced Config menu tab and select Port Security from
the sub-menu. Choose Security Overview from the next sub-menu.
2. The Port Security Overview page will appear, as displayed in Figure
72, allowing you to see the security settings for all of the ports on a
switch.
Figure 72 Port Security Overview Page
3. To change any of the security settings for a port, click on the port
number in the Port Index column on the left-hand side of the page.
You will be taken to the Port Security page, where you can configure
port security as described in the previous section.
Note
To view the port security settings for a different switch in your
switch stack, use the Stack ID pull-down menu and the Apply button
at the top of the page.