Allied Telesis AT-S41 - Manual (Page 158)

AT-S41 User’s Guide
158
System MAC Address
This parameter specifies the MAC address of the switch. This
parameter cannot be changed.
System IP Address
This parameter specifies the IP address of the switch. You must
specify an IP address if you intend to remotely manage the switch
using a Web browser, a Telnet utility, or an SNMP management
program.
System Subnet Mask
This parameter specifies the subnet mask for the switch.
System Default Gateway
This parameter specifies the default router’s IP address. This
address is required if you intend to remotely manage the switch
from a management station that is separated from the switch by
a router.
Enable/Disable DHCP Mode
This parameter allows you to enable and disable DHCP mode.
DHCP is disabled by default. To learn more about DHCP mode, see
Activating DHCP on page 163.