Allied Telesis AT-S41 User Manual
Page 87
AT-S41 User’s Guide
87
Set Path [C]ost
Sets the cost parameter used in deciding which port provides the
lowest cost path to the root bridge for that LAN. The range is 1 to
65535.
Set [T]runk Priority
Sets the parameter used as a tie breaker when two or more trunk
groups are determined to have equal costs to the root bridge. The
default value for priority is 128. The range is 0-255.
Set Trunk Path [C]ost
Sets the cost parameter to decide which trunk group provides the
lowest cost path to the root bridge for that LAN. The range is 1 to
65535.
The following information is for display purposes only and cannot
be changed from the Spanning Tree Port Configuration Menu.
Port
The port number.
Trunk
The trunk group number. A number in this column indicates that
the port is a member of a port trunk.
Link
The link status between the port and the end node connected to
the port. Possible values are:
Up - indicates that a valid link exists between the port and the end
node.
Down - indicates that the port and the end node have not
established a valid link.
State
This parameter indicates the current STP status of the port.
Possible values are:
❑ Forwarding
❑ Listening
❑ Learning
❑ Blocking
Speed
The operating speed of the port.
MAC Address
The MAC addresses of the ports on the switch.