Horner APG SmartStack I/O HE800DNS600/HEDNS600 - Manual (Page 95)

MAN0577-03-en
Page 95 of 98 EO 09-0009
DeviceNet Modules
HE800DNM650 & HE800DNS600
B.2. DNS_Task Common Variables
Figure 57: DNS_Task Common Variables
Variable Meaning
Received message number of received CAN-Messages
Sent messages number of sent CAN-Messages
Received Overruns our DeviceNet controller has two internal error frame counter
for detected
Low Transmission Quality if the internal DeviceNet Slave error frame counter overstep a
defined limit
Bus Off Counter This number will increment when the bus is off or not powered
during bus cycles
Baudrate this value shows numeric the actual baudrate the Master is
working with(255 = Auto, 0 = 500kBaud, 1 = 250Kbaud, 2 =
125kBaud)
Activated bus parameters value 0, the Master has found a configuration data base
coming from HSyCon, value 1, the Master device isn’t
configured and need to be configured via HSyCon
Hard Transmission Aborts this value indicates transmission aborts by the Slave
Table 48: DNS_Task Common Variables