Horner APG SmartStack I/O HE800DNS600/HEDNS600 User Manual
Page 40

MAN0577-03-en
Page 40 of 98
EO 09-0009
DeviceNet Modules
HE800DNM650 & HE800DNS600
The language of the System Configurator can be set. Select the desired language and confirm the entry
with the OK button.
A message appears that the System Configurator must be started again in order to activate the selected
language. Please carry this out.
After restarting the System Configurator, the language will have changed to the one selected.
Note: Up to now not all languages are available for all fieldbuses!
5.9 Start
Options
After activating the Settings > Start Options menu point in the network mode (the network mode can be
changed by choosing Window > Logical Network View) , the following dialog will appear.
Here it is possible to set the various starting options or modes. Some are of importance only for the OPC-
Server operation.
The important ones are given below.
Figure 16: Settings > Start Options
• Simulation mode ON/OFF
Only valid for the OPC Server.
• Start HSyCon hidden if started via OPC
Only valid for the OPC Server.
• Start HSyCon next time with last Configuration
When this is selected the last saved configuration in the HSyCon is automatically loaded when the
HSyCon is started again.