Horner APG SmartStack I/O HE800DNS600/HEDNS600 User Manual
Page 72

MAN0577-03-en
Page 72 of 98
EO 09-0009
DeviceNet Modules
HE800DNM650 & HE800DNS600
Error Number Description
-30
User: Driver not opened (device driver not loaded)
The device driver could not be opened. Device driver not installed.
Wrong parameters in the driver configuration. If the driver finds invalid
parameters for a communication board and no other boards with valid
parameters are available, the driver will not be loaded.
-31
User: Can’t connect with device board
-32
User: Board not initialised (DevInitBoard not called)
-33
User: IOCTRL function failed
A driver function could not be called. This is an internal error between
the device driver and the DLL. Make sure to use a device driver and a
DLL with the same version. An incompatible old driver DLL is used.
-34
User: Parameter DeviceNumber invalid
-35
User: Parameter InfoArea unknown
-36
User: Parameter Number invalid
-37
User: Parameter Mode invalid
-38
User: NULL pointer assignment
-39
User: Messagebuffer too short
-40
User: Size parameter invalid
-42
User: Size parameter with zero length
-43
User: Size parameter too long
-44
User: Device address null pointer
-45
User: Pointer to buffer is a null pointer
-46
User: SendSize parameter too long
-47
User: ReceiveSize parameter too long
-48
User: Pointer to send buffer is a null pointer
-49
User: Pointer to receive buffer is a null pointer
Table 27:CIF Device Driver Error Numbers (-30..-49)
Error Number Description
1000
If the operating system of the device reports an initialisation error, then a
value of 1000 will be add to the error number and shown to the user
Table 28: CIF Device Driver Error Numbers (1000)