Horner APG SmartStack I/O HE800DNS600/HEDNS600 - Manual (Page 38)

MAN0577-03-en
Page 38 of 98 EO 09-0009
DeviceNet Modules
HE800DNM650 & HE800DNS600
The following table is meant to clarify the method of addressing:
Byte Addressing Word Addressing
Byte 0 IB 0 IW 0 Word 0 IB 0 IW 0
Byte 1 IB 1 -
Byte 2 IB 2 IW 2 Word 1 IB 1 IW 1
Byte 3 IB 3 -
Byte 4 IB 4 IW 4 Word 2 IB 2 IW 2
Byte 5 IB 5 -
Figure 11: Image of the method of addressing for input
Byte Addressing Word Addressing
Byte 0 QB 0 QW 0 Word 0 QB 0 QW 0
Byte 1 QB 1 -
Byte 2 QB 2 QW 2 Word 1 QB 1 QW 1
Byte 3 QB 3 -
Byte 4 QB 4 QW 4 Word 2 QB 2 QW 2
Byte 5 QB 5 -
Figure 12: Image of the method of addressing for output
5.5 Device
(Slave)
5.5.1. Device Configuration
To call up the menu Device Configuration, set the focus at the device (left mouse click) and select the
menu Settings > Device Configuration
or
make a doubleclick on the device icon will open the Device Configuration window. The section Device
Configuration
on page 25 describes the configuration.