Horner APG SmartStack I/O HE800DNS600/HEDNS600 User Manual
Page 29

MAN0577-03-en
Page 29 of 98
EO 09-0009
DeviceNet Modules
HE800DNM650 & HE800DNS600
Some of devices need some further parameterisation data, to change for example a measurement
limitation or a value range. These data is Node specific and their functionality can not be explained at this
point.
The explanation can be normally found in the corresponding Node manual.
This window below shows an example of parameter data of a device.
Figure 4: Settings > Device Configuration > Parameter Data
Two tables are available: one table with all available parameters and one table for customized
parameters. These parameters can be selected from the available parameters to that table.
This manual is related to the following products: