beautypg.com

Horner APG SmartStack I/O HE800DNS600/HEDNS600 User Manual

Page 58

background image

MAN0577-03-en

Page 58 of 98

EO 09-0009

DeviceNet Modules

HE800DNM650 & HE800DNS600




Fieldbus

From Version

PROFIBUS-DP Master

1.040 (Kombimaster) bzw. 1.140
(DP-Master)

InterBus Master

2.040

CANopen Master

1.040

DeviceNet Master

1.058

Table 18: Firmware for I/O Watch functions

The following table lists the typical steps to use the I/O Watch monitor.
Preconditions:
• The project/configuration already exists, containing a DeviceNet Master and a DeviceNet device (or

Slave) as described in CHAPTER 3: Getting Started – CSCAPE Configuration starting on page 15.

• The Configuration has been downloaded into the DeviceNet Master using Online > Download
• Running bus system

1. Open the existing project using File > Open.
2. Open the Windows dropdown menu and select Window > Logical Network View to change the

window. A window with three sections opens

Left Window

Center Window

Right Window

Project Tree structure

Tag / Symbol

IO Watch


3. Open the tree structure in the left window to reach the I/O module of the device desired:

Project > Master > Device > Connection Type > Date Type

Figure 35: Logical Network View and I/O Watch

This manual is related to the following products: