Horner APG SmartStack I/O HE800DNS600/HEDNS600 User Manual
Page 63

MAN0577-03-en
Page 63 of 98
EO 09-0009
DeviceNet Modules
HE800DNM650 & HE800DNS600
CHAPTER 7: FILE, PRINT, EXPORT, EDIT AND VIEW
7.1. File
7.1.1. Open
An existing project can be opened with File > Open.
7.1.2. Save and Save As
When the file name is known, the configuration can be saved under the File > Save menu, otherwise
the File > Save As menu must be selected.
7.1.3. Close
The current project can be closed with File > Close.
7.2. Print
After the current printer has been selected in the File > Printer Setup menu, the configuration can be
printed out under the File > Print menu. For a page view, select the File > Page View menu.
Figure 41: File > Print
The base setting prints information on one sheet only for one device.
Topology the topology of the Bus system.
Bus parameters prints the Bus parameters of the Bus system.
Address table prints the address table of the Master.
Device table prints the device table.