Red Lion IndustrialPr 6000 Router - Manual (Page 96)

Software User Guide 96
Services Tab
3.5.5 SixView Manager
The SixView Manager menu item allows you to configure various aspects of the SixView Manager Client to communicate
with a SixView Manager hosted at Red Lion or at your location.
• Click on the “SixView Manager” menu item and the following window will appear:
Enable SixView Manager Access: Select Yes to enable the SixView Manager Client, which will enable the device to
communicate with the SixView Manager Server identified by the Host Address entered in the field below. To disable
the SixView Manager Client, select No in the “Enable SixView Manager Access” pull down menu. All fields in the dialog
window will disappear. The recommended setting for this field is Yes.
Note: A device managed by the SixView Manager Server may have its configuration altered at any time, without warn‐
ing, so it is important to be aware of the actions the selected SixView Manager Server is configured to perform upon
receiving a check‐in from a new device before enabling this option. The recommended setting for this field is YES.
Primary Server Address (Required): Enter the IP Address or host name of your SixView Manager primary server.
When changing the Primary Address to your own private SixView Manager server, you may want to consider setting
the Secondary Address to the Red Lion SixView Manager test server (server1.sixviewmanager.com) for trial and initial
production rollouts This will enable Red Lion support staff to monitor the progress and better assist in diagnosing
potential problems.
Secondary Server Address: Enter the IP Address or host name of your SixView Manager secondary server.