Red Lion IndustrialPr 6000 Router - Manual (Page 60)

Software User Guide 60
Network Tab
Select DNS Method: Select the method by which DNS Server information should be obtained. The recommended set‐
ting for this field is “Use Peer DNS”. Choices include:
Use Unit Default: Do not obtain DNS information from PPPoE Server. Use settings from Network‐>DNS Settings instead.
Use Peer DNS: DNS information should be obtained from the peer host once connected.
Use Custom DNS: DNS information is entered manually in the fields which will appear below.
Use Default Route: Select Yes to use this interface as the default route.
Dial on Demand: Select Yes to enable this feature. The recommended setting for this field is No.
• Click on the “Save” button for changes to be saved without activating the interface, the “Apply” button will save
your settings and apply them immediately. To revert to the previous defaults, click on the “Revert” button.
3.4.3 Firewall
The Firewall menu item allows you to configure every aspect of the firewall on the Red Lion router.
The Firewall menu is organized in four (4) sub‐sections: General Settings, ACL Rules, Masquerade/NAT/DMZ Rules, Port
Allow/Forwarding Rules.
3.4.3.1 General Settings (Firewall)
The General Settings menu is used to configure common access services to the Red Lion router and configure how the
interfaces are interpreted.
• Click on the General Settings menu item and the following dialog window will appear: