Red Lion IndustrialPr 6000 Router User Manual
Page 104
Software User Guide
104
Services Tab
•
None: Keep‐alives not used.
•
All: Keep‐alives enabled for all sockets.
•
Accept: Keep‐alives enabled for listening server socket side connections only. This applies to the clear text server for Cli‐
ent mode sockets, or the SSL Encrypted server for Server mode sockets.
•
Remote: Keep‐alives enabled for client initiated sockets.
•
Local: Keep‐alives enabled for Client connections bound to a local IP address.
You may need to adjust the master Keep‐alive timer via Network‐>TCP Global Settings‐>TCP Keep Alives.
Note: Enabling TCP keep‐alives may dramatically increase the total amount of traffic for the affected socket(s) depend‐
ing on the master interval, probe and timeout settings, which should be considered for connections using a wireless
(cellular) connection with respect to total data usage for the subscripted plan.
SSL Client Table Properties:
•
Click on the Add button and the following dialog window will appear:
Label (Required): Enter a unique name to describe this connection.
TCP Listening IP: Enter the IP to listen on for incoming connections. If not using static IP addresses, it is recommended
to use the Advanced Setup option “Bind Interface for accepting TCP Connections” instead. The recommended settings
for this field are: