Red Lion IndustrialPr 6000 Router - Manual (Page 36)

Software User Guide 36
Admin Tab
• Click on the System Time menu time and the following window will appear.
Time Zone: Select the time zone corresponding to your geographical location by choosing one of the values available
on the drop down list provided.
To configure the date and time for your Red Lion router there are three options:
Option 1:
Sync to NTP Server: Select Yes to enable synchronizing the system clock to an NTP server.
Option 2 ‐ Manual Configuration:
Current Date (MM/DD/YYYY) (Required): Set the Sync to NTP Server field to No and enter the Current Date using the
shown format.
Current Time (HH:MM:SS) (Required): Set the Sync to NTP Server field to No and enter the Current Time using the
shown format.
Note: The Hour field in on the 24‐hour time clock, range 00‐24. This page verifies that the month, day, year, hour, min‐
ute and seconds conform to expected inputs. For example, month range from 01‐12, days range from 01‐31 (checks
for limit according to month, i.e. January has 31 days, February has 28 or 29 depending on year, etc.)
Option 3:
Use Local System Time: Set the Sync to NTP Server field to No and click on the Use Local System Time button. The local
time as referenced from your browser is used to populate the settings.
• Click on the Apply button to save your settings and apply them immediately. To revert to the previously saved
defaults, click on the “Revert” button.