Red Lion IndustrialPr 6000 Router - Manual (Page 105)

Software User Guide 105
Services Tab
• Leave Blank (0.0.0.0) to allow connections from any interface.
• Use 127.0.0.1 for internal connection use only (gwlnx Protocol Converter).
TCP Listening Port (Required): Enter the listening port for this connection. Please note that this port must be allowed
in the Firewall access rules for any external/untrusted interface. It may be useful to review the results of Status‐>Net‐
work‐>Socket Statuses‐>TCP Only to confirm that your choice of listening port is not already in use. (Ports under
“Local Address” with a state of “Listen” are in use.)
SSL Destination IP (Required): Enter the IP or Domain Name of the SSL server to which you would like to connect.
SSL Destination Port (Required): Enter the Port number of the SSL server to which you would like to connect.
• Click on the Finish button. You will be returned to the DHCP Relay dialog window and the Remote Servers table
will be populated with the entered data.
• To delete an existing rule, select it in the table and click on the Delete button. To edit an existing rule, select it in
the table and click on the Edit button.
• Click SAVE to store the settings for the next reboot, or click APPLY for the settings to take effect immediately.
Selecting Revert, will reset all fields to previously saved defaults.
3.5.8.2 SSL Server
The SSL Server menu item is used to configure the Red Lion router to issue SSL certificates to requesting SSL clients.
• Click on the SSL Server menu item and the following dialog window will appear: