Red Lion IndustrialPr 6000 Router User Manual
Page 154
Software User Guide
154
Automation Tab
Analog Output
•
Click on the Analog Output button and the following dialog window will appear:
Channel: A channel is a physical IO point that can be either analog or digital.
Modbus Address: This field indicate the register addresses for each channel. Configuration must be sequential.
Addresses are fixed sequentially from the base adddress.
Output Range: Select the type of signal to be supplied by the output channels.
Disabled: This option will completely disable the output channel.
0‐5 VDC: When selected, the analog output will be configured to supply a DC voltage from 0‐5 VDC. The ouput voltage will be
scaled to 0‐32767 (decimal value in the IODB/Modbus Address field).
0‐20 mA: When selected, the analog output will be configured to supply a current from 4‐20 mA. The output voltage will be
scaled to 0‐32767 (decimal value in the IODB/Modbus Address field).
I/O Channels
•
Click on the I/O Channels button and the dialog window below will appear. The I/O Channels dialog window will
provide a list of all the channels with their associated IODB/Modbus Address.