Red Lion IndustrialPr 6000 Router - Manual (Page 113)

Software User Guide 113
Services Tab
TCP Client Broadcaster: If this option is selected, the device will support 10 TCP Client broadcast socket using IP Destination
configuration for connectivity.
TCP Client Broadcaster Traffic Activator: If this option is selected, the device will support 10 TCP Client broadcast socket using
IP Destination configuration for connectivity and would connect only if the serial data is available to broadcast.
Peer IP Address (Required): Enter the peer IP Address into this field. This is required for UDP communication. This
specifies the Peer IP address and if set to 0.0.0.0 any remote IP can send UDP packets to our peer port, and return
packets will be sent back to the IP of the last host that sent a message. Packets cannot be sent until one is received
first (to learn the remote peer’s IP). If set to a specific IP, then packets will be sent to this IP only. The recommended
setting for this field is “0.0.0.0” to allow any IP to send packets to the peer import number.
Peer IP Port (Required): Enter the peer Port number into the field. This is required for UDP communication. Consult
your network administrator for UDP applicaton destination port number.
Client IP Port (Required): Enter the client IP port number into this field. This is required if the peer IP Address is set to
a specific IP, then packets will be sent to specific IP at this client IP port number only. Consult your network administra‐
tor for UDP application destination port number. Set to 0 if the Peer IP is set to “0.0.0.0”.
• Click SAVE to store the settings for the next reboot, or click APPLY for the settings to take effect immediately.
Selecting Revert, will reset all fields to previously saved defaults.