Red Lion IndustrialPr 6000 Router - Manual (Page 29)

Software User Guide 29
Status Tab
networks. Your local default gateway is a good test, and this IP can be found in the your routing table. Also, a com‐
monly available internet server available to test against is 4.2.2.2
Source Interface: The Source Interface offers the option of using different interfaces to send the Ping through. This is
useful if you have a VPN Tunnel in place. Testing the connection through the VPN Tunnel is required to verify connec‐
tivity through the tunnel.
Choose the interface that the VPN Tunnel has listed for the Local Subnet end‐point, i.e. if the Left Subnet is
10.100.100.0/24 and eth1 has 10.100.100.1 as its IP Address, then choose Source Interface eth1.
Specify a Host/IP Address at the head‐end to Ping through the tunnel.
• Click on the Ping button to see the result.
3.2.3.3 Socket Test
The Socket Test menu item will allow you the “Telnet” to desired destination IP and Port addresses to verify the socket
availability.
Host/IP Address field: Type in the IP Address or URL you wish to connect to via Telnet.