Red Lion IndustrialPr 6000 Router - Manual (Page 12)

Software User Guide 12
Access Red Lion Web Server
At this point, you are connected to the Red Lion router and can configure it to meet your needs.
If the ppp0 or wwan0 interface do not show an IP address, this could indicate that the internal SIM/Module has not been
properly activated. Low or invalid signal strength may also contribute to the issue. Please contact your service provider to
ensure proper activation. You may need to enter provisioning information in the NetworkingCellularProvisioning
screen. Consult
Section 2.1 for more information.
1.3.2 SSH, Telnet, Serial RS‐232 Connections to Red Lion Routers
For alternative connections to the Red Lion router, please contact Red Lion Technical Support for additional documenta‐
tion.