Red Lion IndustrialPr 6000 Router - Manual (Page 17)

Software User Guide 17
Cellular Configuration
2.1.5.2 Verifying IP Connectivity
First, check to make sure that your device is connecting to the cellular network and obtaining an IP address.
Navigate to the Web UI Status screen shown below:
If your screen looks similar to the one shown above, you are having signal reception difficulties. You can further verify this
condition by examining the LED signal meter.
SN6000 units: Observe the signal LED as shown below.
Signal
OFF No signal available or signal strength is below ‐100 dBm
ON Excellent signal strength = greater than ‐69 dBm
FLASH
Fast: Every 300ms = ‐79 to ‐70 dBm
Medium: Every 600ms = ‐89 to ‐80 dBm
Slow: Every 1200ms = ‐99 to ‐90 dBm