5 default variation – Red Lion IndustrialPr 6000 Router User Manual
Page 144
Software User Guide
144
Automation Tab
Object 23 ‐ Frozen Change Event: This field is activated on both Levels 2 and 2+. It’s used to determine if a DNP point
will generate events. In case a DNP point generates events (Object 2 Binary Change Events) then it should be associ‐
ated to a Class (Class 1, Class 2 or Class 3), otherwise it should be associated to None. By default, all DNP Points don’t
generate events, this feature should be modified by the user.
•
Click Finish to enter your exception into the table.
•
To edit an entry, select the station in the table and click on the edit button. To delete an existing entry, select the
station in the table and click on the Delete button.
•
Click on Store I/O Mapping to save your configuration before moving to the next project. Click on the Object Map‐
ping button to return to the DNP3 Object Mapping Configuration dialog window.
3.6.4.5
Default Variation
Binary Objects
1: Binary Input: Combo Box that shows the different choices for Object 1 (Binary Input) that the user can select as a
default variation.
2: Binary Input Change: Combo Box that shows the different choices for Object 2 (Binary Input Change Events) that
the user can select as a default variation.
10: Binary Output Status: Combo Box that shows the different choices for Object 10 (Binary Output) that the user can
select as a default variation.