Red Lion IndustrialPr 6000 Router - Manual (Page 84)

Software User Guide 84
Network Tab
Enter Alternate DNS Server #2: This field is already filled in; it is showing the current server in use by the Red Lion
server. Enter the IP Address of a Backup DNS Server you want to use, if the Primary DNS Server is unable to perform a
DNS lookup. Note: This setting may be overridden if a network interface is set to obtain its configuration information
from its peer (either via PPP or DHCP).
Static Hosts
Static Host entries may be added for local hosts, allowing the Red Lion router to resolve local host names to IP addresses.
• Click on the Add button on the following dialog window will appear:
Enter Host Name (Required): Enter the desired Host Name.
Enter Domain Name: Enter the desired Domain Name.
Enter IP Address (Required): Enter the host IP Address.
• Click on the Finish button. You will return to the DNS Settings dialog window and the Static Hosts table will now be
populated with the recently entered data.
• To delete an existing host, select it in the table and click on the Delete button. To edit an existing rule, select it in
the table and click on the Edit button.
• Click on the “Save” button for changes to be saved without activating the interface until you reboot the unit, the
“Apply” button will save your settings and apply them immediately. To revert to the previous defaults, click on the
“Revert” button.