Red Lion IndustrialPr 6000 Router - Manual (Page 130)

Software User Guide 130
Automation Tab
Enable Application Layer Confirmation: The DNP V3.00 Slave Driver can be configured to retry unconfirmed applica‐
tion link primary frames. The number of retries the driver sends and the retry timeout are configurable. This service is
disabled unless Application Link Confirmations check box is selected.
Application Layer Retries: The number of Retries is configurable between 0 (Application Link Retries disabled) and 255.
Application Layer Timeouts (ms): The Retry Timeout is configurable between 0 (Application Link Retries disabled) and
5,000ms
Use different SEQ numbers for CONFIRM and RESPONSE: Check to enable
• Click on the “Save” button to save your configuration. The “Apply” button will save your settings and apply them
immediately. To revert to the previous defaults, click on the “Revert” button.
3.6.4.4 Object Mapping
Object Mapping: When clicking on each link a dialog window appears. The dialog window is used to configure and
map every DNP point to a specific I/O. Note: Each type of I/O must have its corresponding Object Mapping Window
opened at least once, or else the I/O won’t be mapped.