Apple iMac G5, 20-inch User Manual

Page 306

iMac G5 (20-inch) Repair Extension Program -

Remove the power supply. Turn over the power supply to view the label. Affected

power supplies have:

• an Apple part number of 614-0293, 614-0296 (shown below), 614-0326, and 614-

0366

• an AC Input of 100-127V, 50-60Hz (listed below the part number)

Note:

A power supply failure may leave a visible residue on the rear cover, logic board,

and the chassis. The residue does not affect the operation of the iMac G5 and can be left

in place. If desired, the residue on the rear cover can usually be removed using a lightly

dampened disposable cloth. Be sure to thoroughly dry the rear cover before reinstalling it.

Replace the power supply if it meets the criteria mentioned above. Refer to the next

topic in this section, Special CompTIA Codes, for repair coverage information.

Note:

Effective today, these power supply replacements will be excluded from

Service Excellence measurement (in applicable regions). In addition, all first-

generation iMac G5 power supplies are no longer available as Do-It-Yourself (DIY)

parts.

Warning:

Use caution when handling failed electronic components, and be sure to

wash your hands afterwards.