Apple Workgroup Server 8550 - Manual

About This Guide
This guide tells you how to configure your Workgroup Server, use software
programs, use its built-in CD-ROM drive and optional tape-backup unit,
and troubleshoot hardware and software problems. For information about
your server’s hardware, see the setup guide that came with your server.
About your Workgroup Server and Power Macintosh software
Your Workgroup Server is powered by the PowerPC™ microprocessor (or
“chip”). This microprocessor was designed by Apple Computer, Inc.,
Motorola, Inc., and IBM Corporation. The PowerPC microprocessor uses
Reduced Instruction Set Computer (RISC) technology to deliver very high
performance at the lowest possible cost. The PowerPC RISC microprocessor
represents the state of the art in microprocessor design.
Your Workgroup Server will run almost all of your existing Macintosh
software, but for best performance and greatest speed, look for software
programs designed especially for Power Macintosh computers.
Who should read this guide
This guide is intended for the person who administers the server on a day-
to-day basis. You should be familiar with basic Macintosh terms, concepts,
and techniques. If you’re new to the Macintosh environment, see Appendix
A, “Getting Help,” after you turn on your server system. You also need to
know some details of your existing network to choose the appropriate
procedures for connecting the server to your network.
1