Apple iMac G5, 20-inch - Manual (Page 178)

176 - iMac G5 (20-inch) Take Apart Bluetooth Antenna Cable
Replacing the Bluetooth Antenna Cable
1. On the back of the midplane chassis, route the Bluetooth antenna cable under the fan
and speaker cables.
2. If you are replacing the Bluetooth antenna cable with a new one, rub away any
remaining adhesive on the midplane chassis. Peel off the backing on the Bluetooth
holder, and press the holder onto the chassis.
3. Secure the cables in the cable guides on the underside of the chassis.
Replacement Note: If necessary, use a flat-blade screwdriver to press the cable
guides closed over the cables.
4. Thread the Bluetooth antenna cable through the small opening in the chassis.
5. Connect the Bluetooth antenna to the Bluetooth board.
6. Replace the Bluetooth board.
7. Replace the midplane.
8. Replace the back cover.