Command prompt, Reserved words, Show cli command – HP StorageWorks IP Storage Router User Manual
Page 92: Command prompt reserved words show cli command

Configuring the Storage Router
92
IP Storage Router SR2122-2 User Guide
■
Administrator mode allows the user to configure and actively manage the
storage router, its access lists and SCSI routing instances, and the storage
router cluster.
Passwords for Monitor and Administrator mode can be initially configured
through the Setup Configuration Wizard (see “
Running the Setup Configuration
” on page 89). The factory default password for both modes is hp.
Note:
Passwords are shared cluster-wide and when configured on the first storage
router in the cluster, will be shared with any other storage router that joins the cluster.
Command Prompt
The CLI command prompt includes the storage router system name. An asterisk
( * ) appears at the beginning of the prompt if the system configuration has been
modified but not saved.
Reserved Words
Reserved words cannot be used as values or names in CLI commands. Words that
are used as commands or as keywords in commands are reserved words. The
following are additional reserved words in the CLI.
■
acl
■
canonical
■
iprouter
■
iptan
■
loglevel
Show CLI Command
Use the show cli command to display the complete CLI command syntax tree,
along with helpful information about command parameters and arguments. Only
valid commands will display for the current command mode of your IP Storage
Router.