Configuring the high-availability interface – HP StorageWorks IP Storage Router User Manual
Page 106

Configuring System Parameters
106
IP Storage Router SR2122-2 User Guide
1. enable — Enter Administrator mode.
2. admin contactinfo name “PatJ. Smith” email
[email protected] phone “763 555-117” pager
“763 555-7766”
— Provide contact name, email address, phone number,
and pager number. Enclose each string that contain spaces in single or double
quotes.
Note:
The admin contactinfo command requires that you specify either one parameter
or all four parameters.
Configuring the High-Availability Interface
When the storage router is part of a storage router cluster, you will need to
configure the high availability (HA) interface. To configure the HA interface
parameters:
1. enable — Enter Administrator mode.
2. interface ha ip-address 10.1.20.56/24 — Specify or change
the IP address and subnet mask for the HA interface
See
Chapter 11, “Configuring a High Availability Cluster”
for more information
about configuring the SR2122-2 in a high availability cluster.