Configuring time and date – HP StorageWorks IP Storage Router User Manual
Page 101
Configuring System Parameters
101
IP Storage Router SR2122-2 User Guide
Configuring Time and Date
Configuring time and date parameters consists of specifying the time, date, time
zone, and time server. To configure the time and date parameters:
1. enable — Enter Administrator mode.
2. clock timezone US/Pacific — Identify the time zone where the
storage router is located. If a time zone is not identified, time is assumed to be
GMT.
3. clock set 08:20:00 04 15 2002 — Set time and date (for example:
time, 8:20 a.m.; date, April 14, 2002).
4. ntp peer 10.1.60.86 — (Optional) Specify the name or IP address of
the network time protocol (NTP) server with which the storage router will
synchronize the date and time.
Note:
After a time change, a reboot is required to synchronize the internal FC switch
syslog and devlog timestamps.