HP StorageWorks IP Storage Router - Manual (Page 127)

Configuring SCSI Routing
127 IP Storage Router SR2122-2 User Guide
Example 6: Indexed List of Storage Devices
i d interface lunwwn wwpn tgtid lun
vendor product serial number
1 fc4 20000020371912d5 22000020371912d5 n/a 0 DEC
HSG80 LS099969000019511C2H
2 fc4 20000020371912da 22000020371912da n/a 0 DEC
HSG80 LS097776000019511C3B
3 fc4 200000203719129d 220000203719129d n/a 0 DEC
HSG80CCL LS101990000019411NGQ
4 fc4 2000002037191505 2200002037191505 n/a 0
COMPAQ MSA1000 LS101990000019451JM5
5 fc4 20000020371912b2 22000020371912b2 n/a 0
COMPAQ MSA1000 LS099843000019430RC7
6 fc4 200000203719152e 220000203719152e n/a 0
COMPAQ MSA1000 LS093221000019451JM5
Target-and-LUN mapping using WWPN addressing
To map iSCSI targets to storage devices by physical storage address:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target chimaera_apps LUN 24 WWPN
22:00:00:20:37:19:15:05 LUN 0
— Specify desired SCSI routing
instance
zeus. Specify iSCSI target chimaera_apps and LUN 24, and map it
to the desired physical address WWPN
22:00:00:20:37:19:15:05 LUN 0.
To map iSCSI targets to storage devices by an index number:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target chimaera_apps LUN 31
WWPN #?
— Specify desired SCSI routing instance zeus. Specify iSCSI
target
chimaera_apps and LUN 31, and prompt for an indexed list of
available storage addresses using the number sign and a question mark
#?.
3. SCSIRouter zeus target chimaera_apps LUN 31
WWPN #4
— Choose a physical address designated by an index number (see
index number 4 in Example 6 ) to map the iSCSI target
chimaera_apps and
LUN
31 combination to the desired physical address WWPN
22:00:00:20:37:19:15:05, LUN 0.