HP StorageWorks IP Storage Router - Manual (Page 125)

Configuring SCSI Routing
125 IP Storage Router SR2122-2 User Guide
Creating a SCSI Routing Instance
Creating a SCSI routing instance consists of naming the new instance. To create a
SCSI routing instance:
1. enable — Enter Administration mode.
2. SCSIRouter zeus — Create a SCSI routing instance by naming the new
instance
zeus.
Note: You can define up to 12 instances on a single storage router or across a cluster.
For additional details about configuring storage router clusters for high availability, see
Chapter 11, “Configuring a High Availability Cluster”
Configuring a Server Interface
Configuring a server interface consists of assigning a server interface along with
an IP address and subnet mask to the desired SCSI routing instance. If the storage
router is to be used with VLAN, specify the VLAN by its VID.
Without VLAN
To configure a server interface for a SCSI routing instance:
1. enable — Enter Administration mode.
2. SCSIRouter zeus serverif ge2 VLAN 100 10.1.0.45/24
—
Assign a server interface ge2 to the desired SCSI routing instance
zeus.
Specify the IP address and subnet mask
10.1.0.45/24 that IP hosts will use
to access the SCSI routing instance. In this example, the subnet mask of
255.255.255.0 was set using CIDR style /24.