HP StorageWorks IP Storage Router - Manual (Page 134)

Configuring SCSI Routing
134 IP Storage Router SR2122-2 User Guide
Access denied to all iSCSI targets
To deny access by all IP hosts to all iSCSI targets at once:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target all accesslist none
— Specify
that
no IP hosts can access any iSCSI targets that were configured as part of
the specified SCSI routing instance
zeus.
Verifying and Saving Configuration
Verify the access list configuration and the SCSI routing configuration using the
procedures that follow. You can save the configuration at any time by using the
save all bootconfig
command. You must save the running configuration
to the bootable configuration for it to be retained in the storage router when it is
rebooted. Once you have saved the configuration, you can verify that the
configuration to be used when the storage router is rebooted matches the currently
running configuration.
To verify access list configuration:
1. enable — Enter Administration mode.
2. Show accesslist — Display a list of
all existing access lists
( Example 7 ).
3. Show accesslist aegis
— Display the IP host identifies in an access
list ( Example 8 ).
Example 7: Verifying Existence of an Access List
[SR2122]# show accesslist
aegis
hris-mgmt
Example 8: Verifying IP Addresses in an Access List Named aegis
[SR2122]# show accesslist aegis
accesslist aegis description "Access to zeus SCSI routing
service"
accesslist aegis 10.2.0.23/255.255.255.255
accesslist aegis 10.3.0.36/255.255.255.255
accesslist aegis 10.4.0.49/255.255.255.255
accesslist aegis chap-username 12h7b.lab2.webservices