beautypg.com

Table 9: collecting configuration information, 9 collecting configuration information, Table 9 – HP StorageWorks IP Storage Router User Manual

Page 83

background image

Configuring the Storage Router

83

IP Storage Router SR2122-2 User Guide

Table 9: Collecting Configuration Information

Configuration

Item

Description

Required or

Optional

Configuration

deployment

SCSI routing (storage router enables iSCSI hosts to access

Fibre Channel storage. Storage router manages access to

the Fibre Channel storage.)

Required

Management

interface IP address

and subnet mask

The IP address and subnet mask of the storage router

management interface.

Note:

The management interface for each storage router

in a cluster must be on the same IP subnet.

Required

Static route for

management

interface

The destination IP address with subnet mask and then the

gateway IP address.

Required if the

storage router

is managed

from a subnet

other than the

one to which it

is physically

attached unless

the SR2122-2

will be

configured to

use RIP

listening (see

Chapter 6,

“Configuring

System

Parameters.”

)

System name

The name you want to use for the storage router. If you use

the services of a domain name server (DNS), the system

name is the same name you will enter and associate with

the management interface. Maximum length is

19 characters.

Required

GE Interface

The Gigabit Ethernet interface used to communicate to the

IP network, either ge1 or ge2. The default is ge1.

Required for

SCSI routing

only

High availability

(HA) configuration

The storage router can run in either standalone or clustered

mode. The default is clustered. Standalone mode is

recommended if the storage router is not intended to

provide high availability along with other storage routers.

Required for

SCSI routing

only

This manual is related to the following products: