HP StorageWorks IP Storage Router - Manual (Page 142)

Configuring FCIP
142 IP Storage Router SR2122-2 User Guide
Verifying and Saving Configuration
Verify the FCIP configuration using the procedures that follow. You can save the
configuration at any time by using the save all bootconfig command.
You must save the running configuration to the bootable configuration for it to be
retained in the storage router when it is rebooted. Once you have saved the
configuration, you can verify that the configuration to be used when the storage
router is rebooted matches the currently running configuration.
To verify FCIP configuration:
1. enable — Enter Administrator mode.
2. show fcip fcip1 — Displays the operational and connection
information for FCIP instance fcip1. See Example 10 for a TCP server and
Example 11 for a TCP client.
Example 10: Verifying Existence of an FCIP instance for a TCP server
[SR2122-2local]# show fcip fcip1
Instance Device I/F Network I/F
-------- ---------- -----------
fcip1 fc1 ge1 10.0.0.24
Description
-----------
Access to SAN island 5
Destination LocalMode IpAddress IsConnected
----------- --------- --------------- -----------
fcip tcpserver 10.0.0.25 TRUE
LinkState
---------
UP
fcip1 Trace Status
------------------
pktTracing
On, mask 0xffff
mboxTracing On
mboxCmdCount 0