HP StorageWorks IP Storage Router - Manual (Page 137)

137 IP Storage Router SR2122-2 User Guide
9
Configuring FCIP
This chapter explains how to configure your SR2122-2 Storage Router for FCIP
and contains the following sections:
■ Prerequisite Tasks
■ Configuration Tasks
■ Creating an FCIP Instance
■ Assigning an IP Address
■ Assigning a Peer Name and Peer IP Address
■ Configuring Operational Parameters
■ Verifying and Saving Configuration
FCIP is configured in the setup wizard. To configure the FCIP deployment option
further and to verify the configuration you can use the procedure in this chapter or
you can use the web-based GUI. To access the web-based GUI, point your
browser to the management interface IP address of the storage router. After
logging on, click the Help link to access online help for the GUI.
For guidance on choosing the correct configuration for your storage situation,
please refer to
Appendix E, “Recommended Host/Storage Configurations.”
Prerequisite Tasks
Before performing FCIP configuration tasks on the SR2122-2, make sure you
have configured all system parameters as described in
Chapter 5, “Configuring the
Storage Router,” and Chapter 6, “Configuring System Parameters.”
To configure an FCIP instance, you will need the IP address of the FCIP instance
on the peer system (another SR2122-2 Storage Router configured for FCIP).