HP StorageWorks IP Storage Router - Manual (Page 129)

Configuring SCSI Routing
129 IP Storage Router SR2122-2 User Guide
3. SCSIRouter zeus target pegasus_web LUN 3 serial
number #6
— Choose a physical address designated by an index number
(see index number 6 in Example 6 ) to map the iSCSI target
pegasus_web and
LUN
3 combination to the desired physical address serial number
LS093221000019451JM5.
Target-only mapping using WWPN addressing
To map iSCSI targets to storage devices by physical storage address:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target pegasus_email WWPN
22:00:00:20:37:19:12:da
— Specify desired SCSI routing instance
zeus. Specify iSCSI target pegasus_email, and map it to the desired physical
address WWPN
22:00:00:20:37:19:12:da and any LUNs available as part
of that WWPN.
To map iSCSI targets to storage devices by index numbers:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target pegasus_email WWPN #?
— Specify
desired SCSI routing instance
zeus. Specify iSCSI target pegasus_email and
prompt for an indexed list of available storage addresses using the number
sign and a question mark
#?.
3. SCSIRouter zeus target pegasus_email WWPN #2
— Choose
a physical address designated by an index number (see index number 2 in
Example 6 ) to map the iSCSI target
pegasus_email to the desired physical
address WWPN
22:00:00:20:37:19:12:da.
Configuring an Access List
Configuring an access list consists of creating an access list by naming it and
identifying the IP hosts that have permission to access storage devices via iSCSI
target names. IP hosts can be identified by:
■ IP address
■ CHAP user name (used for iSCSI authentication)
■ iSCSI name of the IP host — The iSCSI name is a UTF-8 character string
based on iSCSI functional requirements. It is a location-independent
permanent identifier for an iSCSI node, and is generated when a target is
initially created.