HP StorageWorks IP Storage Router - Manual (Page 132)

Configuring SCSI Routing
132 IP Storage Router SR2122-2 User Guide
Configuring Access
Configuring access consists of specifying which iSCSI targets can be accessed by
IP hosts. When configuring access, you can specify one iSCSI target at a time or
all iSCSI targets. Similarly, you can specify one access list at a time or all IP hosts
using a SCSI routing instance. In addition, you can deny access to iSCSI targets
one at a time or all at once.
The default for access to newly configured iSCSI targets is none. You must
configure access according to the information provided in this section.
Use the procedures that follow according to the type of access:
■ Access an iSCSI target by IP hosts identified in an access list
■ Access an iSCSI target by all IP hosts
■ Access all iSCSI targets by IP hosts identified in an access list
■ Access all iSCSI targets by all IP hosts
■ Access denied to one iSCSI target
■ Access denied to all iSCSI targets
Access an iSCSI target by IP hosts identified in an access list
To specify one iSCSI target at a time to be accessible by IP hosts listed in an
access list:
1. enable — Enter Administration mode.
2. SCSIRouter zeus target chimaera_email accesslist
aegis
— Specify that an iSCSI target chimaera_email, configured as part
of a SCSI routing instance
zeus, can be accessed by IP hosts listed in an
access list
aegis.