GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 96)

LCR-8000G Series User Manual
96
Set vertical axis (Manual + Percentage)
Background The Y (vertical) axis configuration is available for:
 Manual or Automatic fit: Selects whether the
vertical range is manually set or automatically
adjusted as the graph is plotted.
 Absolute or Percentage: Selects how the vertical
range is defined, as absolute values (minimum
and maximum) or percentage of the nominal
(center) value.
Panel operation 1. Press F2 to select % (Percentage).
Abs %
F 2
2. Press F3 to select Manual Fit.
Manual Fit
F 3
3. The Hi percentage, Lo percentage, and the
nominal value of the vertical axis appear.
Step Size:
Cs Hi
Cs Lo
Nominal:
:
:
2 4 8 1
-19.500%
10.500%
100.00mF
Set Hi level 4. Press the Up/Down key to move the
cursor to Hi percentage.
Cs Hi: 10.500%
5. Use the numerical keys to enter the percentage.
Range –1.0x10 12 (Tera) ~ 1.0x10 12 (Tera) %
50%
Enter
1200%
k Enter