GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 8)

LCR-8000G Series User Manual
8
Power Supply
WARNING
 AC Input voltage: 115V/230V, 50/60Hz
 The power supply voltage should not fluctuate
more than 10%.
 Connect the protective grounding conductor of
the AC power cord to an earth ground, to avoid
electrical shock.
Fuse
WARNING
 Fuse type: T3A/250V
 Make sure the correct type of fuse is installed
before power up.
 To ensure fire protection, replace the fuse only
with the specified type and rating.
 Disconnect the power cord before fuse
replacement.
 Make sure the cause of fuse blowout is fixed
before fuse replacement.
Cleaning the LCR-
8000G  Disconnect the power cord before cleaning.
 Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid.
 Do not use chemicals or cleaners containing
harsh materials such as benzene, toluene,
xylene, and acetone.
Operation
Environment  Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (Note below)
 Relative Humidity: < 80%
 Altitude: < 2000m
 Temperature: 0°C to 40°C