GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 77)

PASS-FAIL MODE
77
Set frequency Move the cursor to Freq column.
Enter the frequency using the
numerical keys and unit keys.
Func
Freq
500.00
Ls
2.00 V Volt
Range 20Hz ~ 1MHz/5MHz/10MHz
5 digit resolution
Example:
0.5kHz (500Hz)
k Enter
Set voltage Move the cursor to Volt column.
Enter the voltage using the
numerical keys and unit keys.
Freq
Volt
2.00 V
500.00
Bias
Range
(1mV step)
10mV ~ 2V (DC or AC≤3 MHz)
10mV ~ 1V (AC>3 MHz)
Example:
100mV m
V/A Enter
Select data
capture rate Move the cursor to Spd column.
Select the capture rate by
pressing F1 (Prog) repeatedly.
Bias
Spd
MAX
1.0000H Hi
F 1
DC
AC≤
100Hz AC≤
2kHz AC>
2kHz AC≥
1MHz
Slow 900ms 1.3s 600ms 600ms 620ms
Med 120ms 1.2s 470ms 450ms 470ms
Fast 60ms 650ms 180ms 150ms 150ms
Max 30ms 600ms 120ms 75ms 120ms