GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 101)

GRAPH MODE
101
Speed / Step Setting
Select measurement speed (capture timing)
Background The speed is the same setting used in the basic
measurement (page56), except in the graph mode,
maximum speed setting is not available.
Panel operation 1. Press the Up/Down key and move
the cursor to Speed.
Speed: Fast
2. If necessary, press the Left/Right
key to change the setting (time per
capture).
DC
AC≤
100Hz AC≤
2kHz AC>
2kHz AC≥
1MHz
Slow 900ms 1.3s 600ms 600ms 620ms
Med 120ms 1.2s 470ms 450ms 470ms
Fast 60ms 650ms 180ms 150ms 150ms