GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 103)

GRAPH MODE
103
Running Graph Measurement
Run measurement
Panel operation 1. When the configuration is
completed, press F4 (Start) to start
the graph measurement.
F 4
2. The display changes into graph mode and starts
plotting the measurement data.
CAPACITANCE VS FREQUENCY
ABORT
20.0 40.0 60.0 80.0 100
(Hz)
300.0n
250.0n
(F)
MKR: 40.000 Hz
Cs : 247.04nF LEVEL: 10.0mV
SPEED:FAST
*7
Measurement Ongoing
Latest Measurement
Data (Updated)
Drive Level (or Frequency)
and Speed
3. To abort the measurement, press F6
(Abort).
F 6
4. When completed, the buzzer sounds once and
the display shows the whole plotted data.