GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 61)

PASS-FAIL MODE
61
R
P
Parallel resistance θ Angle
For detailed description of each item, see page37.
Configure beep setting
Background The beep sounds when the pass/fail test result
matches the setting: failed or passed.
Panel operation 1. Press the Menu key, then F5
(System). The system configuration
appears.
Menu
F 5
Precision LCR Meter LCR-8101
5
:
Frequency
Software version 2.03 Oct 25 2008
RS-232
GPIB
Graph mode
Line frequency
Beep
GPIB address
:
:
OFF
50Hz
1MHz
Average : 10
2. Press the Up/Down key and move
the cursor to Beep.
Beep : OFF
3. Press the Left/Right key to select the
beep setting, Off, Pass, or Fail.
Off Beep is turned Off
Pass Beeps when the test result is pass
Fail Beeps when the test result is fail