GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 26)

LCR-8000G Series User Manual
26
Tutorials (Step by Step Operations)
Basic measurement (without Pass/Fail test)
Step Description Details
1. Connect fixture Connect the fixture to the DUT. Page24
2. Enter menu Press the Menu key, followed by F1 (AC
measurement) or F2 (Rdc). Page47
3. Hide scale Press F4 (Show/Hide Scale) to hide the
scale (or show the circuit diagram) Page49
4. Select measur-
ement item Press F1 (First) and F2 (Second)
repeatedly to select the measurement
item. Page50
5. Select series/
parallel circuit If available, press F3 (Series/Parallel) to
select the equivalent circuit model. Page50
6. Set
measurement
frequency Press the Left/Right arrow key and move
the cursor to the Frequency. Use the
numerical and unit keys to set the level. Page52
7. Set
measurement
Voltage Press the Left/Right arrow key and move
the cursor to the Voltage. Use the
numerical and unit keys to set the level. Page54
8a. Select Single
measurement Press the Sing/Rep key to select Single
(manual trigger) measurement. To trigger
measurement, press the Trig key. Page55
8b. Select
Repetitive
measurement Press the Sing/Rep key to select
Repetitive (automatic trigger)
measurement. Press the Left/Right arrow
key and move the cursor to Speed. Press
the Up/Down key to select the speed. Page56