GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 67)

PASS-FAIL MODE
67
Result > Hi
HI
Result < Lo
LO
Lo < Result < Hi
(Pass)
PASS
Run in Percentage mode
1. Press F5 to select Percentage
measurement.
F 5
2. Use the Left/Right key to move the
cursor to Hi/Lo value for editing.
Hi
Lo
+1.00%
–1.00%
100.00mD
3. Use the numerical keys
and unit keys to enter the
value. The editing value
appears at the bottom left
corner of the display.
Range
Speed Med
Auto
Lo Lim: 1.5_
–2.50%
Enter
1.5kH
Enter H k
Backspace All clear
Clear
Increase Decrease