GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 18)

LCR-8000G Series User Manual
18
Calibration key
Calibration
Enters the calibration mode. See
page123 for calibration details.
Unit keys Enters unit when editing values.
D/Q
Dissipation factor or Quality factor
V/A
Voltage or Ampere
H
Henry (for Inductance)
F
Farad (for Capacitance)
Ω
Ohm (for Resistance, Impedance)
S
Siemens (for Susceptance,
Admittance)
k
Kilo (10 3 )
M
Mega (10 6 )
p
Pico (10 –12 )
n
Nano (10 -9 )
µ
Micro (10 –6 )
m
Milli (10 –3 )
Trigger key
Trig
Manually triggers measurement.
Available only in Single
measurement mode (page55).
Arrow keys Selects menu items or parameters.
The Up/Down and Left/Right keys
are used in pairs.
Code key
Code
Enters system codes for changing
drive Voltage/Current display
(page57) or frequency adjustment
resolution (page52).
Clear key
Clear
Clears all previous entries when
editing values.