Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 86)

User’s Manual – Conventional Mode
76
c. The second Stake Points screen will open that
displays all of the information needed to locate
the design point. When connected to a total
station, you would turn the total station
horizontally to 45°00’00”, vertically to 90°00’00”
and send the rod man out about 70 feet before
continuing. Tap the Stake >
. button to continue
to the third screen.
d. With a Height of rod of 5, tap the Shot . button.
(See the Reference Manual for an explanation of
the other fields.)
e. Enter the following shot data:
Angle Right: 45
Zenith: 90
Slope Dist: 70 and then tap to continue.